EasyManuals Logo

Sharp MX-2600N User Manual

Sharp MX-2600N
799 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #552 background imageLoading...
Page #552 background image
5-79
SCANNER/INTERNET FAX
Contents
4
Specify the original size.
(1) Enter the original size.
Touch the [X] key and enter the horizontal dimension
(X) of the original with the keys.
Touch the [Y] key and enter the vertical dimension (Y)
of the original with the keys.
(A) To return the original size to the default size, touch the
[Size Reset] key.
(B) To automatically enlarge or reduce the image to fit the
send size, touch the [Fit to Send Size] key. If you wish
to scan the original at the entered original size, there
is no need to touch this key.
(2) Touch the [OK] key.
The send size will be selected automatically based on the entered original size.
After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the
send size. In this case, the screen of this step appears when you touch the scan size key. For the procedure for
setting the send size, see "Specifying the send size of the image" (page 5-56).
5
Press the [COLOR START] key or the [BLACK & WHITE START] key to scan the
front side of the card.
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
6
Turn the card over and press the [COLOR START] key or the [BLACK & WHITE
START] key to scan the reverse side of the card.
Press the same [START] key that was used to scan the front side.
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
Scan/Special Modes
OK
Card Shot
(1 8 1/2)
inch
(1 8 1/2)
inch
OKCancel
Fit to
Send Size
Size Reset
X
Y
3
8
3
2
8
1
(1) (B) (2)
(A)
X
Y

Table of Contents

Other manuals for Sharp MX-2600N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp MX-2600N and is the answer not in the manual?

Sharp MX-2600N Specifications

Power IconPower
power requirements230 ~240V AC, 50/60 Hz
power consumption1.84 kW
warm-up timeLess than 60 sec.
System Memory IconSystem Memory
copier memoryStandard 1, 024MB, max. 2, 048MB
printer memoryStandard 512MB, max. 1, 536MB
HDD80GB
Paper Handling IconPaper Handling
standard paper capacity1, 100 sheets
maximum paper capacity5, 600 sheets
paper weight (tray)60 g/m² to 209 g/m²
Weight and Dimensions IconWeight and Dimensions
dimensions620 x 695 x 950 mm
weightApprox. 112 kg

Related product manuals