Sharp MX-4100N Operation Guide

4-47
FACSIMILE
Contents
SPECIFYING THE SCAN SIZE AND SEND SIZE
(Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. If, for example, the
scan size were 8-1/2" x 11" (A4) and the send size were 5-1/2" x 8-1/2" (B5), the image would be reduced before
transmission.
• Only standard original sizes can be automatically detected.
☞ STANDARD SIZES (page 4-28)
• When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan
size.
☞ Specifying the original scan size (by paper size) (page 4-48)
☞ Specifying the original scan size (by numerical values) (page 4-50)
Auto Auto
Auto
USB Mem. ScanFaxScan
Standard
Auto Reception
Fax Memory:100%
Internet Fax PC Scan
Scan: Send:
8½x11
File
Quick File
Address Review
Direct TX
Sub Address
Address Book
Special Modes
Resolution
Exposure
Original
Preview
8-1/2" x 11" (A4)
The image is reduced
to 5-1/2" x 8-1/2" (B5)
before transmission
"Scan Size"
"Send Size" is set to
5-1/2" x 8-1/2" (B5)
Transmission

Sharp MX-4100N Specifications

General

Brand	Sharp
Model	MX-4100N
Category	All in One Printer
Language	English