4-70
FACSIMILE
Contents
(14) [Transaction Report] key
☞ CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT (Transaction Report)
(page 4-95)
(15) [Own Name Select] key
☞ TEMPORARILY CHANGING THE SENDER
INFORMATION (Own Name Select) (page 4-98)
(16) [Memory Box] key
☞ SENDING A FAX WHEN ANOTHER MACHINE
POLLS YOUR MACHINE (Polling Memory) (page
4-102)
(17) [Polling] key
☞ CALLING A FAX MACHINE AND INITIATING
RECEPTION (Polling) (page 4-99)
*
Does not appear when the stamp unit is not installed.
[OK] key and [Cancel] key
In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as
follows:
(A) Enter the selected special mode setting and return to the base screen.
(B) Enter the selected special mode setting and return to the special modes menu screen. Touch this key when you
wish to continue selecting other special mode settings.
(C) During selection of special mode settings, this key returns you to the special modes menu screen without saving the
settings. When settings have been completed, this cancels the settings and returns you to the special modes menu
screen.
Special modes can generally be combined with other special modes, however, there are some combinations that are not
possible. If a prohibited combination is selected, a message will appear in the touch panel.
Fax/Special Modes
Erase
Center
Erase
Side Erase
Edge
Erase
Edge+Center
Erase
Edge
Cancel
OK
OK
1/2
(0~1)
inch
(C)
(A)
(B)
To Next Page
Loading...
Need help?
General
