7-32
SYSTEM SETTINGS
Contents
*1 This cannot be set on the machine. Set this in the system settings in the Web pages.
*2 When the Internet fax expansion kit is installed.
*3 When the facsimile expansion kit is installed.
*4 When the application integration module is installed.
Device Control
X Operation from Specified PC
7-63
Operational Authority Prohibited
Hostname or IP Address of PC –
View Password Entry Screen Display in Both PC and MFP
X Operation by User who Has Password
Operational Authority Prohibited
View Password Entry Screen Display in Both PC and MFP
● Soft Keyboard Template Setting – 7-63
Item Factory default setting Page
■ Device Control
7-64
● Other Settings 7-64
X Original Feeding Mode All Disabled 7-64
X Saddle Stitch Position Adjust*
1
0.0 mm 7-64
X Auto Paper Selection Setting Plain Paper 7-64
X Tandem Connection Setting
7-64
IP Address of Slave Machine 0.0.0.0
Port Number 50001
Disabling of Master Machine Mode Disabled
Disabling of Slave Machine Mode Disabled
X Detect Standard in Auto Color Mode 3 7-65
X Auto Switching of Finisher Trays*
2
Enabled 7-65
X Registration Adjustment 7-65
X Optimization of a Hard Disk – 7-65
X Clear All Job Log Data – 7-65
● Original Size Detector Setting
7-66X Original Detection Size Combination Inch-1
X Cancel Detection at Document Glass Disabled
● Disabling of Devices 7-67
X Disabling of Document Feeder Disabled 7-67
X Disabling of Duplex Disabled 7-67
X Disabling of Large Capacity Cassette*
3
Disabled 7-67
Item Factory default setting Page
To Next Page
Loading...
