7-105
SYSTEM SETTINGS
Contents
îš‹ Transaction Report Print Select Setting
7-107
• Single Sending Print Out Error Report Only
• Broadcasting Print Out All Report
• Receiving No Printed Report
• Confidential Reception Print Out Notice Page
îš‹ Activity Report Print Select Setting
7-107• Auto Print at Memory Full Disabled
• Print Daily at Designated Time Disabled
îš‹ ECM Enabled 7-107
îš‹ Distinctive Ring Detection Off 7-107
X Fax Send Settings 7-108
îš‹ Auto Reduction Sending Setting Enabled 7-108
îš‹ Rotation Sending Setting All Enabled 7-108
îš‹ Quick On Line Sending Enabled 7-108
îš‹ Printing Page Number at Receiver Enabled 7-108
îš‹ Date/Own Number Print Position Setting Outside the Original Image 7-108
îš‹ Recall in Case of Line Busy Recall, Number of Times: 2, Interval:
3 min.
7-108
îš‹ Recall in Case of Communication Error Recall, Number of Times: 1, Interval:
3 min.
7-108
X Fax Receive Settings 7-109
îš‹ Number of Calls in Auto Reception 2 7-109
îš‹ Duplex Reception Setting Disabled 7-109
îš‹ Auto Receive Reduce Setting Enabled 7-109
îš‹ Print Style Setting Auto Size Select 7-109
 Set the Telephone Number for Data Forwarding – 7-109
îš‹ Receiving Date & Time Print Disabled 7-110
îš‹ A3 RX Reduce Disabled 7-110
îš‹ Fax Output Settings Varies depending on the machine
configuration
7-110
X Allow/Reject Number Setting All disabled 7-110
X Fax Polling Security Enabled 7-111
Item Factory default setting Page
To Next Page
Loading...
Need help?
General
