PERIPHERAL / OPTION CONFIGURATION
FAX OPTION – MX-FXX3
AR-MM9 Install 8MB Fax Memory to MFP PWB (SLOT E).
Use Sim22-10 to check MX-FXX2 & AR-MM9 are recognised.
Sim 66-02 Fax SW Setting (Destination).
Sim 66-10 Fax Memory Clear (For Extended Memory).
FINISHER – MX-FN12
Sim 26-65 Finisher Alarm Mode:-
Limit number of Copies in staple mode (ON/OFF).
EXTERNAL ACCOUNTING MODULE – MX-AMX3
Sim 55-03 Auto clear function before Copy job execution:-
SSW 1-5 0 = Disable, 1 = Enable
Sim 55-03 Continuous print mode (job queuing for OSA):-
SSW 24-7 0 = Disable, 1 = Enable
MFP DATA BACKUP
Sim 22-06 Data Simulation Print.
Device Clone & Storage Backup.
Sim 56-01 Backup EEPROM Data to HDD.
To Next Page
Loading...
Need help?
General
