Sharp MX-C310 User Manual

SHARP
MAINTENANCE
13
Maintenance Indications:
DK
Black Drum (Counter) has reached
the specified life.
Replace Black Drum Unit
Process
Section
(Drum)
DC
Cyan Drum (Counter) has reached
the specified life.
Replace Cyan Drum Unit
DM
Magenta Drum (Counter) has reached
the specified life.
Replace Magenta Drum Unit
DY
Yellow Drum (Counter) has reached
the specified life.
Replace Yellow Drum Unit.
VK
Black Developer (Counter) has reached
the specified life.
Replace Black
Developer Unit.
Process
Section
(Developer)
VC
Cyan Developer (Counter) has reached
the specified life.
Replace Colour
Developer Units.
VM
Magenta Developer (Counter) has
reached the specified life.
VY
Yellow Developer (Counter) has reached
the specified life.
FK1
Fuser Unit Print (Counter) has reached
the specified limit.
Replace the Heat Roller Kit or
Fuser Unit
Fuser
Section
TK1
Primary Transfer Unit (Counter) has
reached the specified limit.
Replace Primary Transfer Belt
and/or Rollers.
Transfer
Section
TK2
Secondary Transfer Unit (Counter) has
reached the specified limit.
Replace the Secondary
Transfer Roller Unit
TA
Maintenance [All] Counter has reached specified limit
CA
Maintenance [Colour] Counter has reached specified limit
AA
Maintenance [All] & [Colour] Counters have reached the specified limits
Starting Powder:
The following starting powder should be applied to the relevant consumable item during maintenance:-
Starting Powder
OPC Drum
Primary Transfer Belt
MX-C310/311
MX-C380/381
UKOG-0312FCZZ
[Stearic Acid]
UKOG-0123FCZZ
[Kynar Starting Powder]
CAUTION:
Do not apply Stearic Acid (UKOG-0312FCZZ), Strontium Titanium (UKOG-0316FCZZ) or Titanium
Hydroxide (UKOG-0322FCZZ) starting powder to the Primary Transfer Belt.

Sharp MX-C310 Specifications

General

Brand	Sharp
Model	MX-C310
Category	All in One Printer
Language	English