Sharp MX-C310

COLOUR CALIBRATION
SHARP
12
MANUAL COLOUR DENSITY ADJUSTMENT:
Sim 46-21 [for Engine]
Sim 67-25 [for Printer]
Adjust CMYK (15 points) for Copy & Printer Modes.
PRINTER DENSITY CHECK:
Sim 64-05 [PCL Printer]
Sim 64-06 [PS Printer]
HIGH DENSITY PROCESS CONTROL:
[Execute]
Sim 44-21 [for Engine]
HALF TONE IMAGE CORRECTION
[Execute]
Sim 44-26 [for Engine & Printer]
SERVICE COLOUR TARGET SETTING:
Sim 63-07 [for Engine]
Sim 67-27 [for Printer]
Scan Test Pattern to Register Custom Service Target
DEFAULT SETTING (Service Mode):
To return machine to “Standard” setting:-
STANDARD SERVICE TARGET SETTING:
[Execute]
Sim 63-08 [for Engine]
Sim 67-28 [for Printer]
COLOUR BALANCE ADJUSTMENT:
Sim 46-24 [for Engine]
Sim 67-24 [for Printer]
SERVICE MODE
Place printed test pattern onto glass for both Copy &
Printer modes.