Sharp MX-M260 Software Setup Guide

13
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
ENGLISH
X Installation by specifying the machine's address
When the machine cannot be found because it is not powered on or otherwise, installation is possible
by entering the name (host name) or IP address of the machine.
When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION
SCREEN (FOR ALL SOFTWARE)" (page 7), perform the steps below.
1
Click the [Printer Driver] button.
To install the PC-Fax driver, click the [PC-Fax
Driver] button on the "Disc 2" CD-ROM.
*The above screen appears when using the
"Disc 1" CD-ROM.
2
Click the [Custom installation]
button.
3
When you are asked how the
printer is connected, select [LPR
Direct Print (Specify Address)]
and click the [Next] button.
4
Enter the name (host name) or IP
address of the machine and click
the [Next] button.
☞ Checking the IP address of the
machine (page 6)
Ask your network administrator for the
name (host name).
Note
Setup_multi.book 13 ページ ２００９年７月７日 火曜日 午後２時８分

Sharp MX-M260 Specifications

General

Print Technology	Laser
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Copy Speed	26 cpm
Max Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	25 seconds
Fax Resolution	200 x 200 dpi
Paper Capacity	1, 100 sheets
Max Paper Size	A3
Duplex Printing	Yes
Functions	Print, Copy, Scan
Zoom Range	25% to 400%
Supported Paper Sizes	A4, A5, B5
Network Connectivity	Optional (Ethernet)
USB Connectivity	USB 2.0
Weight	28.5 kg