14
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
5
When the model selection
window appears, select the
model name of your machine
and click the [Next] button.
6
When the printer driver selection
window appears, select the
printer driver to be installed and
click the [Next] button.
Click the checkbox of the printer driver to be
installed so that a checkmark ( ) appears.
7
Select whether or not you wish
the printer to be your default
printer and click the [Next]
button.
If you are installing multiple drivers, select the
printer driver to be used as the default printer.
If you do not wish to set one of the printer
drivers as the default printer, select [No].
8
When the printer name window
appears, click the [Next] button.
If you wish to change the printer name, enter
the desired name.
9
When you are asked if you wish to
install the display fonts, select an
answer and click the [Next] button.
• When the PC-Fax driver is being
installed, this screen does not appear.
Go to the next step.
• If you are not installing the PCL printer
driver (you are installing the PS printer
driver or the PPD driver), select [No] and
click the [Next] button.
10
Follow the on-screen instructions.
Read the message in the window that appears
and click the [Next] button.
Installation begins.
11
When the installation completed
screen appears, click the [OK] button.
12
Click the [Close] button in the
window of step 1.
This completes the installation.
• After installation, see "CONFIGURING THE
PRINTER DRIVER FOR THE OPTIONS
INSTALLED ON THE MACHINE" (page 24)
to configure the printer driver settings.
• If you installed the PS printer driver or the
PPD driver, the PS display fonts can be
installed from the "PRINTER UTILITIES"
CD-ROM that accompanies the PS3
expansion kit. See "INSTALLING THE PS
DISPLAY FONTS" (page 28).
• When the PC-Fax driver is being
installed, this screen does not
appear. Go to the next step.
• The PS3 expansion kit is required to
use the PS printer driver or the PPD
driver.
Note
• If you are using Windows
Vista/Server 2008
If a security warning window
appears, be sure to click [Install this
driver software anyway].
• If you are using Windows
2000/XP/Server 2003
If a warning message regarding the
Windows logo test or digital signature
appears, be sure to click the
[Continue Anyway] or [Yes] button.
After the installation, a message
prompting you to restart your
computer may appear. If this message
appears, click the [Yes] button to
restart your computer.
Note
Note
Setup_multi.book 14 ページ ２００９年７月７日 火曜日 午後２時８分
To Next Page
Loading...
