Sharp MX-M260 Software Setup Guide

30
MAC OS X
6
Click the [Continue] button.
7
The License Agreement window
will appear. Make sure that you
understand the contents of the
license agreement and then click
the [Continue] button.
A message will appear asking you if you agree
to the terms of the license. Click the [Agree]
button.
8
Select the hard drive where the
PPD file will be installed and
click the [Continue] button.
Be sure to select the hard drive on which your
operating system is installed.
9
Click the [Install] button.
Installation begins.
10
When the message "The
software was successfully
installed" appears in the
installation window, click the
[Close] button.
This completes the installation of the
software. Next, configure the printer driver
settings.
If the license appears in the different
language, change the language in the
language menu.
Note
If the "Authenticate" window appears,
enter the password and click the [OK]
button.
Note
Setup_multi.book 30 ページ ２００９年７月７日 火曜日 午後２時８分

Sharp MX-M260 Specifications

General

Print Technology	Laser
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Copy Speed	26 cpm
Max Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Warm-up Time	25 seconds
Fax Resolution	200 x 200 dpi
Paper Capacity	1, 100 sheets
Max Paper Size	A3
Duplex Printing	Yes
Functions	Print, Copy, Scan
Zoom Range	25% to 400%
Supported Paper Sizes	A4, A5, B5
Network Connectivity	Optional (Ethernet)
USB Connectivity	USB 2.0
Weight	28.5 kg