8-108
SYSTEM SETTINGS►SETTING MODE FOR FAX
d
The following lists the Setting mode for fax and factory default settings.
System Settings
U: General user; A: System administrator/Administrator
SETTING MODE FOR FAX
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Setup Items
Factory default setting
U A Page
■ System Settings
● Image Send Settings
Fax Settings
Default Settings
• Resolution Setting No Yes
4-50- Apply the Resolution Set when Stored Disabled No Yes
+ (No item) Standard No Yes
• Dial Mode Setting Tone No Yes
4-4
• Auto Wake Up Print Enabled No Yes
• Pause Time Setting 2 seconds No Yes 4-11
• Fax Dest. Confirmation Mode Disabled No Yes 4-26
- Apply to Addresses Other Than Fax – No Yes
4-10
• Speaker Settings No Yes
- Speaker Volume: 5 No Yes
- Ringer Volume Volume: 2 No Yes
- Line Monitor Volume: No Sound No Yes
- Fax Receive Complete Signal
Volume: 2; Tone Pattern: 3
Transmission Complete
Sound Time Setting: 3 sec.
No Yes
- Fax Send Complete Signal
Volume: 2; Tone Pattern: 3
Transmission Complete
Sound Time Setting: 3 sec.
No Yes
- Fax Communication Error Signal
Volume: 2; Tone Pattern: 3
Transmission Complete
Sound Time Setting:
Every 0.3 seconds
No Yes
• Remote Reception Number Setting 5 No Yes 4-122
• Original Print on Transaction Report
Print Out Error Report Only
No Yes 8-65
To Next Page
Loading...
