8-110
SYSTEM SETTINGS►SETTING MODE FOR FAX
*1 When an inner finisher, finisher, finisher (large stacker), saddle stitch finisher or saddle stitch finisher (large stacker) is installed.
*2 When a folding unit is installed
*3 When the number of copies is set.
- A3 RX Reduce Disabled No Yes
4-55
• Output Tray Varies depending on
the machine
configuration
No Yes
• Number of Prints 1 No Yes
• Staple Settings
*1
1 Staple at Back No Yes
• Paper Size 8-1/2 x 11 or 8-1/2 x
11R
No Yes
• Fold Size Setting
*2
A3, B4, 11 x 17,
8-1/2 x 14: Enable
A4R, 8-1/2 x 11R:
Disable
No Yes
Allow/Reject Number Setting
• Allow/Reject Number Setting All Invalid No Yes
4-55
• Add New – No Yes
Polling Setting No Yes
4-102
• Set Fax Polling Security Enabled No Yes
F-Code Memory Box – Yes Yes 4-107
● Fax Data Receive/Forward (Manual)
Fax Settings Yes Yes
4-61
Receive Settings Auto Reception Yes Yes
Multiple Set Print
*3
Disabled Yes Yes
Staple Disabled Yes Yes
Forward Received Data – Yes Yes
Setup Items
Factory default setting
U A Page
To Next Page
Loading...
