Sharp RD-1600 - TPR-1230 Specification

2-4
2.4.2 TPR-1230 Specification.
TPR-1230
Diameter of column
300mm
Distance from Column surface to Spindle center, max.
1170mm
Distance from Column surface to Spindle center, min.
340mm
Travel of Spindle head
890mm
Distance from Base surface to Spindle end, max.
1370mm
Distance from Base surface to Spindle end, min.
490mm
Elevating height of Arm.
630mm
Effective area of Table.
635mm╳520mm╳415mm
The dimensions of the Base (L ╳ W ╳ H)
1710mm╳715mm╳180mm
Taper hole Spindle.
MT#4
Stroke of the Spindle.
250mm
R.P.M. of Spindle.（R.P.M.╳ step）
44-1500 12 steps
Feed of Spindle（REV.╳ step）
0.05,0.09,0.15 3 speeds
Main motor. 2.25KW(3HP)
Elevating motor. 0.75KW(1HP)
Clamping motor. 0.75KW(1HP)
Coolant pump . 0.1KW(1/8HP)
Machine height from floor, max.
2780mm
Height from the Column top to floor
2060mm
Net weight (approx.) kgs
2100kg
Shipping Gross weight. (approx.) kgs
2300kg
Shipping dimensions(L╳W╳H）
2035mm╳995mm╳2240mm
The max. processing capacity.
Steel
∅42
Drilling
Cast iron
∅55
Steel
∅25
Taping
Cast Iron
∅38