Sharp RD-1600 - Rotate the Gearbox Right or Leftwards

5-15
5.9 Rotate the Gearbox right or leftwards.
5.9.1（For TPR-1230,TPR-1230H）
1. Press the figure1 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrow head to B. The clamping device is released now.
2.
Rotate the hand wheel clockwise to move rightwards and counter clockwise to move
leftwards, as shown in up left picture.
3. Press the figure 2 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrow head to A. The clamping device is tightened now.
Precaution：
After UNLOCK pressed, the Arm can move for and backwards in addition to
move left and right wards.
5.9.2（For TPR-1600H/ TPR-2000H）
1. Press the figure1 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrow head to B. The clamping device is released now.
2.
Rotate the hand wheel clockwise to move rightwards and counter clockwise to move
leftwards, as shown in up left picture.
3. Press the figure 2 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrow head to A. The clamping device is tightened now.
Precaution：
After UNLOCK pressed, the Arm can move for and backwards in addition to
move left and right wards.