7-1
CHAPTER 7
Maintenance
7.1 General
Whether the machine is maintained well or not will lead to its long or short life. If well
served, the machine lasts long and is easy to maintain.
7.2 Daily Maintenance.
7.2.1 Clearing
Only one person is allowed to do the clearing. Before clearing, please power off.
7.2.2 Please clean every parts using a metal brush and a rag, dipped with oil,
to rub them.
（Please use CC68 ）After every day’s work, please proceed the
following maintenance.。
（For TPR-1230, TPR-1230H）
The relevant names
No. Parts
1. Column
2. The arm rail
3. Spindle
4. Work table
5. The base
6. The ball screw
7. The counter weight
guide rail
（For TPR-1600H/ TPR-2000H）
The relevant names
No. Parts
1. Column
2. The arm rail
3.
Spindle
4.
Work table
5. The base
6.
The ball screw
7.
The counter weight
guide rail
To Next Page
Loading...