Sharp RD-1600 - TPR-2000 H Specification

2-6
2.4.4 TPR-2000H Specification.
TPR-2000H
Diameter of column 432mm
Distance from Column surface to Spindle center, max. 2000mm
Distance from Column surface to Spindle center, min. 490mm
Travel of Spindle head 1510mm
Distance from Base surface to Spindle end, max. 1900mm
Distance from Base surface to Spindle end, min. 500mm
Elevating height of Arm. 1100mm
Effective area of Table.
1000mm╳800mm╳500mm
The dimensions of the Base (L ╳ W ╳ H) 2908mm╳1102mm╳250mm
Taper hole Spindle. MT#5
Stroke of the Spindle. 370mm
R.P.M. of Spindle.（R.P.M.╳ step）
35 – 1890 12 steps
Feed of Spindle（REV.╳ step）
0.07 - 0.96 6 steps
Main motor. 5.625KW(7.5HP)
Elevating motor.
2.25KW(3HP)
Clamping motor.
0.75KW(1HP)
Coolant pump .
0.1KW(1/8HP)
Machine height from floor, max. 3470mm
Height from the Column top to floor 2960mm
Net weight (approx.) kgs 6100kg
Shipping Gross weight. (approx.) kgs 6600kg
Shipping dimensions(L╳W╳H) 3105mm╳1400mm╳3240mm
The max. processing capacity.
Steel
∅65
Drilling
Cast iron
∅70
Steel
∅50
Taping
Cast Iron
∅60