To enable Wi-Fi network on your phone,
1. Use the toggle switch to enable Use Wi-Fi.
2. From Network & internet screen, tap on Wi-Fi to see a list of available
Wi-Fi networks and select a network to conect.
3. The status icon indicates your signal strength.
4. The security icon indicates authentication is required.
You may tap the setting icon next to the Wi-Fi network you have
connected to
• View network details including Signal strength, Frequency, Security,
Network usage, Privacy, Type, Randomized MAC address, IP address,
Gateway, Subnet mask, DNS, Transmit/Receive link speed, and IPv6
addresses.
• Change Wi-Fi setting: FORGET, DISCONNECT, or SHARE.
• Enable or disable Auto-connect (allow connection to this network when
in proximity) with the toggle switch
.
• Add a device: use QR code to add a device to this network.
• Swipe down to view network details like Wi-Fi type, Randomized MAC
address, IP address, Gateway, Subnet mask, DNS, Transmit/Receive link
speed, and IPv6 address.
Wi-Fi
170
To Next Page
Loading...
