Pair new device
1. From the Connected devices screen, tap Pair new device to scan and
pair a Bluetooth device.
2. Wait for the phone to scan nearby Bluetooth devices.
3. Select a device to pair (it should be the device that you know and trust).
4. Wait a moment for the pairing process.
5. When the Bluetooth pairing code appears, tap Pair.
Optional: you may tap Device name to change the default device name of
your phone to be visible by other Bluetooth devices.
USB
From the Connected devices screen, tap USB to set USB preferences (your
phone must connect to a device via USB to set this option).
You may set USB controlled by
• Connected device
• This device (your phone)
Set USB used for
• File Transfer
• USB tethering
• MIDI
• PTP
• System updates
• No data transfer (charging only)
180 181
To Next Page
