Sharp SD-2060 - Page 26

24
MAKING COPIES
I
I
I
I
I
I
I
I
MARGIN SHIFT
Margin shift adjustment
Press the MARGIN SHIFT key.
Press the CHANGE key.
●
The following message will appear.
SIDE 1 SIDE 2 SELECT MARGIN SHIFT
AND DIRECTION
BY 10–KEY PAD.
9mm 9mm
SIDE 1 SIDE 2 DIRECTION
AMOUNT PUSH AMOUNT PUSH
USE
0 1 0 1 PUSH 1
3mm 2 3mm 2
6mm 3 6mm 3 CHANGE
9mm 4 9mm 4 PUSH 2
12mm 5 12mm 5
15mm 6 15mm 6
●
If the ERASE feature has been selected, a message for
selecting MARGIN SHIFT or ERASE will appear. Select
MARGIN SHIFT by pressing key 1 on the 10-key pad.
Select the desired shift amounts by using 1, 2, 3, 4, 5 or
6 on the 10-key pad for side 1 and side 2.
●
To correct an entry error, press the SCROLL DISPLAY key.
Use the 10-key pad to indicate the shift direction.
●
To use the indicated shift direction, press key 1. To change the
direction, press key 2.
●
Selected shift amounts and shift direction will return to the
standard settings when the MARGIN SHIFT key is pressed
again.
★ KEY OPERATOR The shift direction programming step can be
eliminated. See page 18 of the KEY OPERATOR’S GUIDE.
1
2
3
4
Margin shift
MARGIN SHIFT
ERASE
DUAL PAGE COPY
COVERS INSERTS
CHANGE
TRANSPARENCY
INSERTS
4
78
9
AUDIT
CLEAR
12
3
5
6
CLEAR/STOP
0 / C /
4
78
9
AUDIT
CLEAR
12
3
5
6
CLEAR/STOP
0 / C /
<M082>
Downloaded from: http://www.usersmanualguide.com/