Sharp SD-2060 - Page 28

26
MAKING COPIES
I
I
I
I
I
I
I
I
COVERS
Press key 1 on the 10-key pad.
●
The following message will appear.
USE 10–KEY PAD TO SELECT COVER
PLACEMENT.
FRONT BACK FRONT+BACK
: PUSH 1 : PUSH 2 : PUSH 3
Select cover placement by pressing key 1, 2, or 3 on
the 10-key pad.
●
If FRONT or FRONT+BACK is selected, the message “PRINT
ON FRONT COVER? USE 10-KEY PAD TO SELECT. YES:
PUSH 1 NO: PUSH 2” will appear.
Select YES or NO by pressing key 1 or 2 on the 10-key
pad.
●
If yes is selected, the first page of the document will be copied
onto the front cover sheet.
●
In either case, the START key indicator will light (if the bypass
tray contains paper) and the following message will appear.
USE DOCUMENT FEEDER.
LOAD COVER STOCK INTO BYPASS–TRAY.
Load the cover stock into the bypass tray, making sure
that the cover stock is the same size as the copy paper.
Enter the desired number of copies and press the
START key.
4
5
6
7
8
Covers
START
4
78
0 /
AUDIT
CLEAR
12
3
5
6
4
78
9
AUDIT
CLEAR
12
3
5
6
CLEAR/STOP
0 / C /
<M090A>
4
78
9
AUDIT
CLEAR
12
3
5
6
CLEAR/STOP
0 / C /
4
78
9
AUDIT
CLEAR
12
3
5
6
CLEAR/STOP
0 / C /
<M008>
Downloaded from: http://www.usersmanualguide.com/