I
54
I
I
COPIER
TROUBLE?
I
I
I
I
I
MISFEED REMOVAL
Open the exit roller cover and gently pull out the
original.
Open the RADF cover. Remove any sheets in this area.
Then close the RADF cover.
●
If the original is not easily removed, open the exit roller cover to
pull out the original.
Pull out the misfed original while pressing the RADF
release button.
Return the removed originals to the RADF tray in
accordance with the message, and then press the
START key.
●
Even if misfed originals can be removed only from locations A
and/or C, open the RADF cover and then close it to release the
misfeed condition.
1
2
3
4
Location A
Location B
Location C
RADF release button
Misfeed removal
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
