I
66
I
I
COPIER
TROUBLE?
I
I
I
I
I
If a problem persists after checking the above, please consult your
key operator prior to contacting your authorised Sharp Service Cen-
tre.
Self-diagnostic function
An automatic self-diagnostic function is built into this copier. Should
the copier malfunction, the self-diagnostic function will locate the
problem and stop the copier to prevent damage. An alphanumeric
code will appear in the COPIES MADE display.
Example 1
(CH) will appear when any cover or door is open. Check the covers
and doors to ensure that they are all closed.
Example 2
Should the copier stop completely, and an alphanumeric code and
the message “CALL FOR SERVICE. CODE: L4-
” appear,
contact your authorised Sharp Service Centre.
★ KEY OPERATOR See page 25 of the KEY OPERATOR’S GUIDE.
TROUBLE SHOOTING
Problem Solution
Use standard paper.
●
Non-standard paper used? If using special papers, feed the
paper through the bypass tray.
Paper misfeeds frequently.
●
Is paper properly installed? See pages 19 and 48.
●
Pieces of paper inside copier? Remove all pieces of misfed
paper. See page 53.
Store copy paper flat in the
●
Paper curled or damp? wrapper in a dry location.
See page 52.
Dust, dirt, smudges appear on
●
Document glass or RADF Clean regularly. See next page.
copies. transport belt dirty?
Trouble shooting
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
