Sharp SF-2022 - Page 27

This mode reduces toner consumption, increasing cost
effectiveness, with only a slight loss in copy density. Follow the
procedure below for setting the toning level.
EXPOSURE
mm AUTO
mm MANUAL
wm PHOTO
EXPOSURE
= AUTO
mm MANUAL
Press the AUTO/MANUAL/PHOTO key to select the
] PHOTO mode.
2 Open the front cover.
4
Q
Sa
Q
&
n
cig
<
G
3
fe}
a
o
Press the AUTO/MANUAL/PHOTO key for
approximately 3 seconds.
® The "3" EXPOSURE indicator will light. This indicates the
standard toning level.
To enter the toner save mode, press the LIGHT key
until the "1" EXPOSURE indicator lights.
@ This toner save mode will remain in effect until the toning
level is reset to the standard value "3".
a=