Sharp SX 1075

REPLACEMENT PARTS ORDER FORM
Spare or replacement parts can be purchased directly through Sharp Packaging or your local distributor. If
faxing or mailing in an order it must be accompanied by a hard copy purchase order. Please follow up with a
confirming telephone call. Cut off time for next day air shipments is 2:30 p.m. CST.
RECOMMENDED SPARE PARTS
Check

to Order
PART NO. QTY. DESCRIPTION
 706597-01 ___ Fuse, 5A, 250V, 5 x 20mm
 700058-01 ___ Fuse, 10A, 250V, 5 x 20mm
 706785-01 ___ Printhead, Thermal, 6” 203 dpi
 869129-01 ___ Ribbon, Standard, 6.5” x 1181’
 869130-01 ___ Ribbon, Premium, 6.7” x 1181’
 706455-01 ___ Roller, Printer Platen
 960551-01 ___ Sealer Maintenance Kit
 960552-01 ___ Seal Wire Kit
 960881-01 ___ Stripper Plate Maintenance Kit
 705522-01 ___ Spring, Compression, Nip Roller
 706566-01 ___ Spring, Compression, Sealer
 706622-01 ___ Spring, Printhead Cradle Latch
 706572-01 ___ Spring, Unwind
 812072-01 ___ Switch, Proximity
 700198-01 ___ Timing Belt, Motor (170XL037)
 706509-01 ___ Timing Belt, Pressure Jaw
(640-8MGT-20)
 706548-01 ___ Timing Belt, Printhead up/down
(267-3M-09)
 706446-01 ___ Timing Belt, Platen and Drive Roller
(80XL037)
 706547-01 ___ Timing Belt, Ribbon Rewind, Motor
Side (300-3M-09)
 706549-01 ___ Timing Belt, Ribbon Rewind, Rewind
Shaft Side (88MXL025)
Copy this form, and then fax it to Sharp Packaging at the number listed above.
Sharp Packaging Systems
P.O. Box 124
Sussex, WI 53089
parts@sharppackaging.com
Parts: 800-634-6359 (Ext. 571)
Fax: 262-246-3387
(Please Fill in Boxes Below)
Customer Name:
Shipping Address:
Sharp Account Number:
Model and Serial Number:
Shipping Method:
Purchase Order Number:
Other Information:
REPLACEMENT PARTS ORDER FORM
SX™ Service and Maintenance Manual A-1 960714-02B © 2007 I2407