Optional Answering Machine Settings
31
2. Answering
Machine
1 Press once and once.
2 Press once and twice.
3 Press .
4 Press to turn on automatic fax
reception, or to turn it off.
5 Press to return to the date and time display.
FUNCTION
1
2
STOP
ON A.M. FAILURE
♦ Automatic fax reception YES: The reception mode will switch to FAX mode,
allowing the machine to continue to receive faxes automatically. With this
setting, you can still use the remote commands to listen to your messages
and then erase them (see Remote Operations on page 37).
Automatic fax reception is set to NO at the factory before shipping. If you want
to set it to YES, press the panel keys as follows:
Display:
A.M. SETTING
1=YES, 2=NO
The display briefly shows
your selection, then:
OGM ONLY MODE
OGM only mode
If needed, you can turn off recording of incoming messages. In this case, your
outgoing message will play, but callers will not be able to leave a message.
(The machine will still receive faxes sent by automatic dialling.)
1 Press once and once.
2 Press once and once.
FUNCTION
OGM ONLY MODE
Display:
A.M. SETTING
all.bookPage31Wednesday,January30,20022:32PM
To Next Page
Loading...
Need help?
General
