Loading the Document
25
2. Sending
Faxes
Other restrictions
♦ The scanner cannot recognise yellow, greenish yellow, or light blue ink.
♦ Ink, glue, and correcting fluid on documents must be dry before they pass
through the document feeder.
♦ All clips, staples, and pins must be removed from documents before loading
in the feeder. If these are not removed, they may damage the machine.
♦ Documents which are patched, taped, torn, smaller than the minimum size,
carbon backed, easily smudged, or have a slippery coated surface should
be photocopied, and the copy loaded in the feeder.
Loading the Document
One page can be placed in the feeder at a time.
♦ If you need to fax or copy more than one page, insert each additional page
gently and carefully in the feeder while the previous page is being scanned.
Do not try to force the additional page in, as this may cause double-feeding
or jamming.
1 Adjust the document guides to the
width of your document.
2 Insert the document face down in the
document feeder. The top edge of the
document should enter the feeder first.
• READY TO SEND will appear in the
display.
all.bookPage25Monday,August19,20024:05PM
To Next Page
Loading...
Need help?
General
