PBX operations
62
PBX operations
If your fax is connected to a PBX, you can use it to perform the following
operations:
Making enquiry calls: During a call, you can put the other party on hold,
make a further call to a third party, and then go back to your original caller.
Transferring calls: You can transfer a call to another number on the same
PBX without operator assistance.
Making enquiry calls
1 During the telephone conversation, press . This puts the other party
on hold.
2 When you hear the dial tone, dial the number of the third party for the
enquiry call.
3 When you have finished the enquiry call, you will be automatically
returned to the original caller as soon as the third party hangs up.
R
Transferring calls
1 During the telephone conversation, press . This puts the other party
on hold.
2 When you hear the dial tone, dial the number to which you want to
transfer the call. When the other party answers, hang up, and the call
will be transferred.
• If the other party does not answer, press again to return to the original
caller.
R
R
all.bookPage62Monday,August19,20024:05PM
To Next Page
Loading...
Need help?
General
