Why does my Sharp UX-P200 print blank pages when receiving a fax?
If the printing paper comes out blank when receiving a document on your Sharp Fax Machine, ensure the document is loaded properly in the feeder of the transmitting machine. Try making a copy or printing a report to confirm your machine's printing ability.
Why does my Sharp UX-P200 Fax Machine say 'MEMORY IS FULL/ SEE MANUAL'?
If your Sharp Fax Machine displays "MEMORY IS FULL/ SEE MANUAL", it means the memory is full, possibly due to receiving too much data before pages could print. If faxes are in memory because printing isn't working, fix the printing problem to allow printing to resume.
Why can't I dial on my Sharp UX-P200 Fax Machine?
If dialing isn't possible on your Sharp Fax Machine, ensure the power cord is properly plugged into the outlet and the telephone line is correctly connected to both the TEL. LINE jack and the wall jack. Also, verify that the fax machine is set to the correct dialing mode for your telephone line.
Why isn't the automatic document feeder working on my Sharp Fax Machine?
If the automatic document feeding isn't working on your Sharp Fax Machine for transmission or copying, check the size and weight of the document.
What does 'FAX RX IN MEMORY' mean on my Sharp UX-P200?
The "FAX RX IN MEMORY" message on your Sharp Fax Machine indicates a fax has been received in memory because the imaging film needs replacement, you've run out of printing paper, or the paper is jammed. The fax will automatically print once the issue is resolved.
Why does my Sharp UX-P200 say 'CHECK FILM/ CHECK COVER/ CHECK PAPER JAM'?
If your Sharp Fax Machine displays "CHECK FILM/ CHECK COVER/ CHECK PAPER JAM", check if the imaging film is loaded correctly or needs replacement. Ensure the operation panel is completely closed by pressing down on both sides. If there's a paper jam, clear it.
What to do if Sharp Fax Machine keys are not responding?
If your Sharp Fax Machine does not respond when you press any keys, and no beep sound is made, unplug the power cord and plug it back in after a few seconds.
Why is there no dial tone on my Sharp Fax Machine?
If there's no dial tone on your Sharp Fax Machine when you pick up the handset or press the SPEAKER key, make sure the handset cord is connected to the correct jack.
How to fix a blank display on a Sharp UX-P200 Fax Machine?
If nothing appears on the display of your Sharp Fax Machine, check that the power cord is properly plugged into the power outlet. You can also test the outlet by plugging in another electrical appliance to see if it receives power.
What causes 'DOCUMENT JAMMED' on Sharp UX-P200 Fax Machine?
If your Sharp Fax Machine displays "DOCUMENT JAMMED", it means the original document is stuck. Document jams can occur if you load more than 10 pages at once or load documents that are too thick.
Instructions for connecting the handset, power cord, and telephone line.
Step-by-step guide for installing the imaging film roll.
How to properly load paper into the tray.
Entering your name and fax number for outgoing transmissions.
Configuring the machine's internal clock for accurate records.
Choosing between FAX and TEL reception modes.
Optimizing image quality for outgoing faxes.
Step-by-step process for manual fax transmission.
Storing and using auto-dial numbers for efficient faxing.
Direct dialing method for sending faxes without auto-dial.
Automatic answering and reception of faxes.
An overview of common issues and their solutions.
General| Type | Plain Paper Fax |
|---|---|
| Modem Speed | 14.4 Kbps |
| Printing Technology | Thermal Transfer |
| Automatic Document Feeder Capacity | 10 sheets |
| Paper Tray Capacity | 50 sheets |
| Transmission Time | 15 seconds |
| Paper Size | A4 |
To Next Page
