Sharp VC-H705X

Channel Skip/Cancelling Skip
Channel skip
If there are channel positions that are not preset, you can skip them with the following procedure.
PREPARATION
• Select the video channel on your TV and turn on the VCR.
Example: Skip channel position 12.
MENU
o*
MENU
TIMER
MODE
LANGUAGE
A ▼ : S E L E C T
SETs ENTER MENU:EXIT
^ -
A SET
T*0
-----1
O Press MENU.
Select item “CHANNEL PRESET" with and press
SET.
▲
or
T
-- N
CHANNEL PRESET
AUTO
. SET
* o
© Select item “MANUAL” with A/T and press SET.
◄ / ►
or
/Numeric\
\ buttons /
' ..
BJpreset CH re
CHANNEL 02
FINE TUNING 4 ►
SKIP ON IilJJI
© Set the channel position you wish to skip with (or
numeric) buttons.
Ex.: 12
A
or
T
r mmm +
PRESET CH 12
CHANNEL 02
FINE TUNING 4 ►
fiSKIP ON na
1
j
© Select SKIP setting mode with a/V.
◄
or
►
PRESET CH 12
CHANNEL 02
FINE TUNING 4 ►
BSKIP OFF
SET
* o
© Press ◄ / ► to select SKIP ON and press SET.
© If you wish to set more channels to be skipped, repeat steps
©through®.
MENU .
>«-%. a Normal
* Screen
© To return to the normal screen, press MENU.
Cancelling skip
PREPARATION
• Select the video channel on your TV and turn on the VCR.
Example: Reset channel position 12 .
• Follow the same procedures O, © in Channel skip and then the procedures ©-© below.
◄ / ►
or
/ Numeric^
\ buttons )
fipRESET CH Q]
CHANNEL 02
FINE TUNING 4 ►
SKIP OFF
© Select the channel position you wish to unskip with the
numeric or 4 / ► buttons.
Ex: 12
A
T
PRESET CH 12
CHANNEL 02
FINE TUNING 4 ►
fiSKIP OFF
© Select SKIP setting mode by pressing a/T.
◄
or
►
f - —-s
PRESET CH 12
CHANNEL 02
FINE TUNING 4 ►
Bskip on ■ 81301
SET
♦ o
© Press ◄ / ► to select SKIP OFF and press SET.
© If you wish to unskip more channels, repeat steps ®
through ©.
MENU KI .
a Normal
* Screen
© To return to the normal screen, press MENU.
15