Sharp VC-H705X - Editing from a Camcorder to Your VCR; Specifications

Editing from a Camcorder to Your VCR _
Editing from your Camcorder is extremely easy using your VCR with a linear tape counter, etc. The connection
diagram below is for a guideline only. Refer to your Camcorder Operation Manual for precise connection
information.
Specifications _
Format: VHS PAL/NTSC standard
Video recording system: Two rotary heads, helical scan
Video signal system: PAL/NTSC colour or monochrome (CCIR system B/G) signal
Hi-Fi audio recording system: Deep-layer recording system conforming to stereo Hi-Fi VHS standard
Maximum playing time: 720 minutes max. (EP mode) with E-240 tape (PAL)
480 minutes max. with T-160 tape (NTSC)
Tape width: 12.7 mm
Tape speed: PAL : 23.39 mm/sec. (SP) ,11.70 mm/sec. (LP), 7.80 mm/sec. (EP)
NTSC: 33.35 mm/sec. (SP), 16.67 mm/sec. (LP: Playback only),
11.12 mm/sec. (EP)
Antenna: 75 Ohm unbalanced
Reception channels: VHF channel 0 to 12, UHF channel 28 to 69
RF output signal: UHF channel 28 to UHF channel 69 (preset to UHF channel 37)
Power requirement: AC 240 V, 50 Hz
Power consumption: 15 W (approx.)
Operating temperature: 5°C to 40°C
Storage temperature: -20°Cto55°C
Video input: 1.0 Vp-p, 75 Ohm
output: 1.0 Vp-p, 75 Ohm
Audio input: (phono type) Line: -8dBs, 47 kohm min.
output: (phono type) Line: — 8dBs (approx.), 1 kohm max.
Hi-Fi audio: Dynamic range: Typically 85 dB
Frequency response: 20 Hz-20 kHz
Wow and flutter: less than 0.005% Wrm
Dimensions: 360 (W) x 253.3 (D) x 92 (H) mm
Weight: 2.8 kg
Supplied accessories: R6 (AA, UM/SUM-3) battery x2
75-ohm coaxial cable, operation manual, remote control unit
Design and specifications are subject to change without notice.
33