Sharp VC-H705X

Recording with the Timer
Confirming Timer Programmes
You can see on the On Screen Display a list of all timer programmes that are already set.
PREPARATION
• Turn on your TV and VCR and select the video channel on the TV.
TIMER
o ♦
[Example]
1/2
BATE PR START STOP
▼ * 2/2 ▼ r
CLEARtCAHCKL
A ViSELECT
SSTtZHTKR MBNOiSXlT
A SET
*T * O
O Press TIMER. (If VCR is in timer standby mode and the
indicator is lit, cancel the timer standby mode by
pressing TIMER ON/OFF button and then turn on the
power.)
The screen for confirming programmes that have been
set will appear.
•Check the information displayed.
• If you want to correct the data, select the programme to
be changed with a/T and then press SET. Correct the
setting as described on pages 25 and 26.
MENU
/'"N A Normal
t Screen
© To return to the normal screen, press MENU.
•After checking or correcting the programme contents,
press TIMER ON/OFF to enter the Timer Standby
mode.
Cancelling Timer Programmes
Perform the following procedure to cancel timer programmes that have already been set.
PREPARATION
•Turn on your TV and VCR and select the video channel on the TV.
TIMER
o*
1/2
V * 2/2 V ▼
CLEAR:CANCEL
A ViSXLBCT
SET:ENTER MENU:EXIT
A
or
T
O Press TIMER. (If VCR is in timer standby mode and the
“0” indicator is lit, cancel the timer standby mode by
pressing TIMER ON/OFF button and then turn on the
power.)
The screen for confirming timer recording programmes
that have been set will appear.
•Select the programme number you wish to cancel with
A/T. (The selected programme will appear highlighted.)
CLEAR
0*
1/2
DATE PR START STOP
▼ T 2/2 ▼ V
CLEAR:CANCEL
A ▼ : S ELECT
SET t ENTER MENU:EXIT
© Double-check that it is the programme you wish to
cancel, and press CLEAR. It will be cleared on the
screen.
A Normal
t Screen
© To return to the normal screen, press MENU.
•If there are still some programmes set, press TIMER
ON/OFF to enter the Timer Standby mode.
0-7