EasyManua.ls Logo

Sharp Viewcam VL-NZ10S - Setting the Digital Zoom

Sharp Viewcam VL-NZ10S
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Useful Features
28
Setting the Digital Zoom
Available modes:
TAPE-CAMERA, CARD-CAMERA
You can select three different zoom ranges: 1–
10K (optical zoom), 10–40K (digital zoom) or
10–300K (digital zoom). The digital zoom
allows you to record powerful close-up pictures
with the same operation as normal zooming.
Notes:
The digital zoom is in addition to the optical
zoom giving a combined maximum zoom range
of 1–300K.
As the image is enlarged digitally, the picture
quality decreases when higher digital zoom
settings are used.
1 In TAPE-CAMERA or CARD-CAMERA
mode, press the MENU button until the
menu screen appears.
2 Press l or m on the operation button
to select Y, then press the SET button.
3 Press l or m to select “DGTL ZOOM”,
then press the SET button.
4 Press l or m to select “40” or “300”,
then press the SET button.
5 Press the MENU button to turn off the
menu screen.
CAMERA
PHOTO SNAP
SNAP EFF.
DGTL ZOOM
TAPE SPEED
REC
16 9:
M
OT ION
RETURN
GUIDE
SET
OFF
40
300
04
DGTL ZOOM
WT25DZOOM
-
The “D” digital zoom indicator is displayed
during digital zooming.
To use optical zoom only
Select “OFF” in step 4 above.
Digital zoom indicator

Table of Contents

Related product manuals