Digital Still Camera
Features
76
Copying an Image from
Card to Tape
Available mode:
CARD-VCR
Use the procedure below to select still images
recorded on a card and insert them in a tape.
1 Insert the recorded card and a Mini DV
cassette into the camcorder.
2 Set the camcorder to TAPE-VCR mode,
then locate where you want to insert an
image on the tape.
3 Set the camcorder to CARD-VCR mode.
4 Press j, k, l or m to select the
desired image, then press the MULTI
button.
• The selected image is displayed in full-
screen.
5 Press the REC START/STOP button.
• The camcorder enters Recording
Standby mode.
6 Press l or m to select “REC”, then
press the SET button to begin copying
the image to the tape.
7 Press the SET button to stop copying.
8 Press l or m to select “CANCEL”, then
press the SET button to cancel Record-
ing Standby mode.
1
4
2
5
3
6
3000
-
00
2/1PAGE
1
NORMAL
PLAYBACK
3000
-
001
NORMA L
CARD
01/
3000
-
001
NORMAL
CARD
0133/
CANCEL
REC
To Next Page
Loading...
