Useful Features
Playback
47
Useful Features
Multiple Strobe Playback
Available mode:
TAPE-VCR
The multiple strobe playback function can be
used to capture the action of a fast-moving
subject at intervals of 1/8 of a second using a
9- or 16-frame picture. This is useful when you
want to check your form in sports such as
tennis or golf.
1 Remove the card from the camcorder.
2 In TAPE-VCR mode, press the MENU
button until the menu screen appears.
3 Press l or m on the operation button
to select V, then press the SET button.
4 Press l or m to select “MULTI
FRAME”, then press the SET button.
5 Press l or m to select “9 FRAMES” (9-
frame picture) or “16 FRAMES” (16-
frame picture), then press the SET
button.
FRAMES
16
M
ULTI FRAME
EFFECT
PLAYBACK
PIC.
M
ULTI
FRAME
AUDI O DUB
AUDI O
PB EFFECT
SET
OFF
FRAMES
FRAMES
9
16
M
OT ION
RETURN
6 Press the MENU button to turn off the
menu screen, then begin playback.
7 Press the STILL button fully
at the point where you want
to begin the multiple strobe
playback.
• A multi-frame picture of the
image is displayed.
To cancel Multiple Strobe Playback
Press the STILL button fully again.
Notes:
• Multiple Strobe Playback cannot be used
during video search, still, slow or reverse
playback.
• When a card is loaded, the multi-frame picture is
recorded on the card (see page 48).
MENU button
STILL button
Operation button
SET
button
To Next Page
Loading...
