Sharp Viewcam VL-NZ10S - Selecting the Audio Playback Mode

Advanced Features
64
Selecting the Audio
Playback Mode
Available mode:
TAPE-VCR
You can select any of the following audio
playback modes.
3 Press l or m on the operation button
to select V, then press the SET button.
4 Press l or m to select “AUDIO”, then
press the SET button.
5 Press l or m to select the desired
audio playback mode, then press the
SET button.
6 Press the MENU button to turn off the
menu screen.
• The selected audio playback mode
indicator displays.
Note:
• The audio playback mode indicator, “AUDIO”,
displays in different colours depending on the
recording mode (12- or 16-bit) used for the
recording being played back. A white display
indicates 12-bit recording mode, while a green
indicates 16-bit.
EFFECT
PLAYBACK
PIC.
M ULTI FRAME
AUDI O DUB
AUDI O
PB EFFECT
SET
1
1
2
+
2
M OT ION
RETURN
AUDIO
12
+
Audio 1+2
• 12-bit recording in stereo (Audio 1 and
Audio 2 channels)
• 16-bit recording in stereo (left and right
channels)
Audio 1
• 12-bit recording in stereo (Audio 1 channel
only)
• 16-bit recording in mono (left channel only)
Audio 2
• 12-bit recording in stereo (Audio 2 channel
only)
• 16-bit recording in mono (right channel
only)
1 Play back a Mini DV cassette with
dubbed audio.
2 Press the MENU button until the menu
screen appears.
AUD I OAUDIO 21
+
21
+
Audio playback mode indicator