Sharp Viewcam VL-NZ10S - Recording with the Self-Timer

Digital Still Camera Features
Card Recording
Digital Still Camera
Features
69
Recording with the Self-
timer
Available mode:
CARD-CAMERA
The self-timer function allows you to record
images after a time-lag of 10 seconds. This is
convenient when you want to record an image
of you and your friends together.
1 In CARD-CAMERA mode, press the
MENU button until the menu screen
appears.
2 Press l or m on the operation button
to select Y, then press the SET button.
3 Press l or m to select “SELF TIMER”,
then press the SET button.
4 Press the STILL button fully to set the
timer.
• The self-timer operating indicator flashes
while the timer counts down.
• The shutter automatically releases after
10 seconds, and a still image of the
subject is recorded.
Notes:
• When recording with the self-timer, stabilize the
camcorder in the horizontal plane by attaching it
to a tripod, etc.
• To cancel the self-timer, press the STILL button
fully again in step 4 above.
• Self-timer mode cancels after recording one
image. Repeat steps 1 to 4 to record another
image with the self-timer.
Caution:
• Do not turn the power off or remove the card
once the self-timer operating indicator begins
flashing.
CAMERA
REC MODE
SELF TIMER
SET
EXECUTE
NORMAL
AUTO
/0194
REC
M OT ION
RETURN
GUIDE
SNAP EFF.
DGTL ZOOM
CARD
NORMAL
AUTO
/0194
CARD
Self-timer operating indicator