EasyManua.ls Logo

Sharp Viewcam VL-NZ10S - Recording in LP (Long Play Recording) Mode

Sharp Viewcam VL-NZ10S
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Useful Features
Useful Features
Camera Recording
39
Recording in LP (Long Play
Recording) Mode
Available mode:
TAPE-CAMERA
This camcorder allows you to record in LP
(Long Play Recording) mode for approximately
50% more recording time with the same picture
quality as that in SP (Standard Play Recording)
mode.
1 In TAPE-CAMERA mode, press the
MENU button until the menu screen
appears.
2 Press l or m on the operation button
to select Y, then press the SET button.
3 Press l or m to select “TAPE SPEED”,
then press the SET button.
4 Press l or m to select “LP”, then press
the SET button.
5 Press the MENU button to turn off the
menu screen.
The long play recording mode indicator
appears.
To return to SP mode
Select “SP” in step 4 above.
CAMERA
PHOTO SNAP
SNAP EFF.
DGTL ZOOM
TAPE SPEED
REC
16 9:
M
OT ION
RETURN
GUIDE
SET
SP
LP
LP
TAPE SPEED
LP
AUTO
45
min
Notes on the use of LP mode
To record in LP mode, be sure to use a Mini DV
cassette labelled for use with LP mode.
Frozen images, mosaic-pattern picture noise,
audio interruptions or audio loss may occur in
the following cases:
—When using a tape which is not designated for
use with LP mode.
—When a tape recorded in LP mode under high
temperature conditions is played back.
—When a tape recorded in LP mode with the
camcorder is played back on a Mini DV player
or camcorder from another manufacturer.
—When a tape recorded in LP mode is played
back on a Mini DV player or camcorder
without an LP function.
Audio dubbing is not possible with LP mode
recording.
Long play recording
mode indicator

Table of Contents

Related product manuals