Advanced Features
54
6 Press l or m to focus on the subject,
then press the SET button.
o: To focus on a more distant subject
p: To focus on a closer subject
7 Press the MENU button to turn off the
menu screen.
• “MF” is displayed.
To return to Auto Focus mode
After performing step 1 to 3 above, press l or
m to select “AUTO”, then press the SET button.
Notes:
• The camcorder may not be able to focus
correctly if the subject is closer than approxi-
mately 1.5 m. Set the zoom control to wide
angle, and try refocusing again.
• If the lens is dirty or fogged, the camcorder may
not be able to focus correctly.
• When “MF” is displayed, you can manually
adjust the focus by pressing l or m, even if the
focus setting screen is not displayed.
Setting the Camcorder to
Full Auto Mode
Available modes:
TAPE-CAMERA, CARD-CAMERA
You can set all manual settings, including
manual focus, white balance, manual exposure
and manual shutter speed, to Full Auto mode in
one operation.
1 In TAPE-CAMERA or CARD-CAMERA
mode, press the MENU button until the
menu screen appears.
2 Press l or m on the operation button
to select T, then press the SET button.
3 Press l or m to select “FULL AUTO”,
then press the SET button.
4 Press l or m to select “EXECUTE”,
then press the SET button.
5 Press the MENU button to turn off the
menu screen.
Note:
• You cannot select “FULL AUTO” when no
manual settings are currently in use.
FOCUS
MF
30
min
EFFECT
MANUA L
PIC.
SCENE MENU
FULL AUTO
MAN. F OC US
W
HITE
EXPOSURE
SHUT. SPEED
QK.
RETURN
RETURN
BAL.
SET
EXECUTE
RETURN
AUTO
2 0
min
30
min
Manual focus indicator
To Next Page
Loading...
