EasyManua.ls Logo

Sharp Viewcam VL-NZ10S - Setting the Shutter Speed

Sharp Viewcam VL-NZ10S
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced Features
Camera Recording
Advanced Features
57
5 Press l or m to select the desired
shutter speed, then press the SET
button.
You can select 17 speeds from 1/25 sec.
(“25”) (slowest shutter speed) to 1/
10,000 sec. (“10000”) (fastest shutter
speed).
The selected shutter speed is displayed
on the menu screen.
6 Press the MENU button to turn off the
menu screen.
EFFECT
MANUA L
PIC.
SCENE MENU
FULL AUTO
MAN. F OC US
W
HITE
EXPOSURE
SHUT. SPEED
QK.
RETURN
RETURN
BAL.
SET
OFF
2000
25
SHUT. SPEED
0000
2000
1
To return to Auto Shutter Speed mode
After performing step 1 to 3 above, press l or
m to select “AUTO”, then press the SET button.
To return to Full Auto mode
Set the camcorder to Full Auto mode (see page
54).
Setting the Shutter Speed
Available modes:
TAPE-CAMERA, CARD-CAMERA
The shutter speed is preset to auto mode,
which automatically selects the optimal shutter
speed for the ambient light. However, depend-
ing on the subject or situation, you may want to
set the shutter speed manually to create a
high-quality picture.
1 In TAPE-CAMERA or CARD-CAMERA
mode, press the MENU button until the
menu screen appears.
2 Press l or m on the operation button
to select T, then press the SET button.
3 Press l or m to select “SHUT.
SPEED”, then press the SET button.
4 Press l or m to select “MANUAL”, then
press the SET button to display the
shutter speed setting screen.
EFFECT
MANUA L
PIC.
SCENE MENU
FULL AUTO
MAN. F OC US
W
HITE
EXPOSURE
SHUT. SPEED
QK.
RETURN
RETURN
BAL.
SET
OFF
AUTO
MANU A L
25
50
SHUT. SPEED
00001
Shutter speed

Table of Contents

Related product manuals