iii
Quick Operation Guide
Easy Camera Recording on
Tape
1 Insert a cassette into the camcorder.
2 Set the Media Selection
switch to TAPE.
3 Hold down the Lock button and set the
Power switch to CAMERA.
• The picture from the lens is now
displayed on the screen.
4 Press the REC START/STOP button to
begin recording.
To pause recording
Press the REC START/STOP button again.
Zooming
Push the Power Zoom control to T (1) (tele-
photo) or W (2) (wide angle) side.
Tape Playback
1 Set the Media Selection
switch to TAPE.
2 Hold down the Lock button
and set the Power switch
to VCR.
3 Press j (or k) on the Operation button
to rewind (or fast forward) the tape to the
desired point.
4 Press m to begin playback.
To stop playback
Press l.
Volume Control
Push the Volume control to the L or + side to
increase (1) or decrease (2) the volume.
AUTO
REC
Power Zoom control
Power switch
STILL button
REC START/STOP button
Lock button
Lock button
Volume control
Power Zoom control/Volume control
Operation button
MULTI button
Media Selection switch
To Next Page
Loading...
