Sharp XE-A207W - Key Sequence

105

■
KeySequence
1.
In the SETTING window, select “13 AUTO KEY.”
• The AUTO KEY window will appear.
2.
Select “2 KEY SEQUENCE” by the
A
key.
3.
Select the pertinent Auto key from the key list by the
A
key.
4.
Enter the key operation sequence by any key except the
V
key.
The register allows to program up to 25 keys for each AUTO
key.
5.
To terminate the procedure press the
V
key, the
conrmation window will appear for sequence data saving.
Select “SAVE”
or “ABANDON” and press the
A
key.
Example
In case of the X1 General report printing.
Display Keyoperation
j
4=(select X1/Z1 MODE)
A
2=(select READING)
A
1=(select GENERAL)
a
a
V
Procedure