EasyManua.ls Logo

Sharp XE-A207W - Computation of VAT (Value Added Tax);Tax; Vat;Tax System

Sharp XE-A207W
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
ComputationofVAT(ValueAddedTax)/Tax
VAT/taxsystem
The cash register may be programmed for the following six VAT/tax systems. The cash register is pre-
programmed as automatic VAT 1-4 system.
AutomaticVAT1through4system(Automaticoperationmethodusingprogrammedpercentages)
This system, at settlement, calculates VAT for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals by
using the corresponding programmed percentages.
Automatictax1through4system(Automaticoperationmethodusingprogrammedpercentages)
This system, at settlement, calculates taxes for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals by
using the corresponding programmed percentages, and also adds the calculated taxes to those subtotals,
respectively.
ManualVAT1through4system(Manualentrymethodusingprogrammedpercentages)
Procedure
z
5
t
This system provides the VAT calculation for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals. This
calculation is performed using the corresponding programmed percentages when “VAT” from the payment
menu is selected just after the
z
key.
ManualVAT1system(ManualentrymethodforsubtotalsthatusesVAT1presetpercentages)
Procedure
A
VAT rate
To use a programmed rate
z
select “VAT”
5
t
This system enables the VAT calculation for the subtotal. This calculation is performed using the VAT 1
preset percentages when “VAT” from the payment menu is selected just after the
z
key. For this
system, the keyed-in tax rate can be used.
Manualtax1through4system(Manualentrymethodusingprogrammedpercentages)
Procedure
z
select “VAT”
5
t
This system provides the tax calculation for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals. This
calculation is performed using the corresponding programmed percentages when “VAT” from the payment
menu is selected just after the
z
key. After this calculation, you must nalize the transaction.
AutomaticVAT1andtax2through4
This system enables the calculation in the combination with automatic VAT 1 and tax 2 through 4. This
combination can be any of VAT 1 and tax 2 through 4. The tax amount is calculated automatically with the
percentages previously programmed for these taxes.

Table of Contents

Other manuals for Sharp XE-A207W

Related product manuals