Sharp XE-A207W - Z Counter

98
•GT1ONX(Usetheselectiveentry)
YES: Print GT1 on the X report.
NO: Not to print GT1 on the X report.
•GT2ONX(Usetheselectiveentry)
YES: Print GT2 on the X report.
NO: Not to print GT2 on the X report.
•GT3ONX(Usetheselectiveentry)
YES: Print GT3 on the X report.
NO: Not to print GT3 on the X report.
•TRGTONX(Usetheselectiveentry)
YES: Print the training GT on the X report.
NO: Not to print the training GT on the X report.
•VDMODEONX1Z1(Usetheselectiveentry)
YES: Print total of VOID MODE on X1Z1 report
NO: Not to print total of VOID MODE on X1Z1 report
•VDMODEONX2Z2(Usetheselectiveentry)
YES: Print total of VOID MODE on X2Z2 report
NO: Not to print total of VOID MODE on X2Z2 report
•PLUDATAONZ(Usetheselectiveentry)
YES: Print PLU data on the PLU Z report.
NO: Not to print PLU data on the PLU Z report.
•EJDATAONZ(Usetheselectiveentry)
YES: Print EJ data on the EJ Z report.
NO: Not to print EJ data on the EJ Z report.
•EJSIZE(Usetheselectiveentry)
SMALL: Print EJ in a small size.
NORMAL: Print EJ in a normal size.

■
ZCounter
Procedure
Program each item as follows:
•GENERALZ1: Max.4 digits (0000 to 9999)
•GENERALZ2: Max.4 digits (0000 to 9999)