Sharp XE-A207W - Z1 General Report; Hourly Report; Electronic Journal

99

■
Z1Generalreport
Procedure
Program each item as follows:
•SD:SAVESALES(Usetheselectiveentry)
YES: Save the sales data in the SD card.
NO: Not to save the sales data in the SD card.
•SD:SAVEEJ(Usetheselectiveentry)
YES: Save the electronic journal data in the SD card.
NO: Not to save the electronic journal data in the SD card.
•SD:SAVEALLRAM(Usetheselectiveentry)
YES: Save all the RAM data in the SD card.
NO: Not to save all the RAM data in the SD card.
•CLEAREJ(Usetheselectiveentry)
YES: Clear the electronic journal data
NO: Not to clear the electronic journal data
•RESETBALGT(Usetheselectiveentry)forXE-A217W/XE-A217Bonly
YES: Reset the balance GT.
NO: Not to reset the balance GT.
•RESETGT(Usetheselectiveentry)
YES: Reset the GT.
NO: Not to reset the GT.

■
Hourlyreport
You can program the memory type and the starting time for the hourly report.
Procedure
Program each item as follows:
•MEMORYTYPE(Usetheselectiveentry)
30MIN: Selects the 30-minute type.
60MIN: Selects the 60-minute type.
•STARTTIME(Usethenumericentry)
Starting time entry (max. 2 digits: 0 to 23)

■
ElectronicJournal
Procedure
Program each item as follows:
•STORETOSD(Usetheselectiveentry)
When the EJ data is recorded on the SD card:
AS IS: Control characters are recorded as they are
W SPACE: Control characters are recorded as double space.
•TRDATASTORE(Usetheselectiveentry)
YES: Record the EJ data in the training mode.
NO: Not to record the EJ data in the training mode.
•XDATASTORE(Usetheselectiveentry)
When the X report data in the EJ is recorded:
HEADER: Record only the header of X report in the electronic journal.
DETAIL: Record the detail of X report in the electronic journal.