XG-C330X/C430X
1 – 4
STANDBY
button
ON button
COMPUTER 1
button
STANDBY/ON button
INPUT buttons
ENTER button
Height Adjustment buttons
Zoom knob
Focus ring
Tilt dial
1. Place the projector facing a screen
On the remote controlOn the projector
This section shows the basic operation (projector connecting with the computer). For details, see the page
described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
2. Connect the projector to the computer and plug the power
cor d into the AC socket of the projector
3. Remove the lens cap and turn the projector on
When connecting equipment other than the computer, see OPERATION MANUAL.
4. Adjust the angle
5. Adjust the focus and the zoom
7.
Tu rn the Power off
6.
Select the INPUT mode
••
••
•
This projector is equipped with an "Auto Keystone
Correction" function that automatically corrects
any trapezoidal distortion within the projected
image.
Bring the projected image into focus
••
••
• Bring the projected image into focus by
rotating the focus ring.
Adjust the projected image size
••
••
• Adjust the projected image size by moving the
zoom knob.
Select the "COMPUTER 1" using the INPUT buttons on the projector or the COMPUTER 1 button on the remote
control.
••
••
• When you press the INPUT buttons on the projector, the INPUT list appears.
Press / to select an item on the list, and press to switch to the selected INPUT mode.
••
••
• When using the remote control, press
/ /
/ / to switch the INPUT mode.
On the remote
control
On the
projector
INPUT list
Press the ST
ANDBY button, then press that button again while the confirmation messag e is displayed, to put
the pr
ojector into standby mode.
••
••
• Even if y
ou unplug the power cord from the AC outlet, the cooling fan continues to run for a while.
On the remote controlOn the projector
On-screen Display
Adjust the projector angle
••
••
•
Adjust the projector angle using the Height
Adjustment buttons.
••
••
•
Rotate the Tilt dial to adjust the horizontal tilt of
the projector.
Height Adjustment
buttons
Tilt dial
Focus ring
Zoom knob
Zoom
i
n
Zo
om out
On-screen Display (RGB)
COMPUTER 1
RGB
1024 × 768
1
INPUT
1
COMPUTER 1
2
COMPUTER 2
To Next Page
Loading...
Need help?
General
