10 English
You will need to assemble your SPIN fan. There are two unweighted legs and one
weighted leg with your fan.
1. Lay the SPIN on its side, facing forward. Install one unweighted leg on the front of
the fan until it securely snaps into place.
2. Install the second unweighted leg on the front of the fan until it securely snaps
into place.
3. Turn the fan over and install the weighted leg on the back side of the fan until it
securely snaps into place.
4. Connect power supply to product input and wall outlet.
Your SPIN is now assembled and ready for use!
ASSEMBLY
No tools required.
To Next Page
Loading...
