Shelly Wave Pro 1 User Manual

27
Conductor stripped length
6 to 7 mm / 0.24 to 0.28 in (green
connector)
5 to 6 mm / 0.20 to 0.24 in (white
connectors)
Shell material
Plastic
Color
Blue
Ambient temperature
-20°C to 40°C / -5°F to 105°F
Humidity
30% to 70% RH
Max. altitude
2000 m / 6562 ft.
15. Important disclaimer
Z-Wave® wireless communication may not always be 100% reliable. This Device should not be
used in situations in which life and/or valuables are solely dependent on its functioning. If the
Device is not recognized by your gateway or appears incorrectly, you may need to change the
Device type manually and ensure that your gateway supports Z-Wave Plus® multi-channel
devices.
16. Declaration of Conformity
Hereby, Shelly Europe Ltd. (former Allterco Robotics EOOD) declares that the radio equipment
type Wave 1 is in compliance with Directive 2014/53/ EU, 2014/35/EU, 2014/30/EU,
2011/65/EU. The full text of the EU declaration of conformity is available at the following
internet address: https://shelly.link/WavePro1-DoC
17. Manufacturer
Shelly Europe Ltd. (former Allterco Robotics EOOD)
Address: 103 Cherni vrah Blvd., 1407 Sofia, Bulgaria
Tel.: +359 2 988 7435
E-mail: zwave-shelly@shelly.cloud
Support: https://support.shelly.cloud/
Web: https://www.shelly.com
Changes in the contact data are published by the Manufacturer at the official website:
https://www.shelly.com

Shelly Wave Pro 1 Specifications

General

Brand	Shelly
Model	Wave Pro 1
Category	Switch
Language	English