Personalized Parameter Settings
Personalized Parameter Settings can match a variety of requirements in use.
There are 8 settings items, such as Battery Power Bar Settings, Power Assistant Level Settings,
Over current Cut Settings, Power Assistant Sensor Settings, Speed Sensor Settings, Throttle
Function Settings, System Settings, and Power-on Password Settings.
To access the Personalized Parameter Settings items option page, hold both the [UP] and the
[DOWN] button for 2 s, then hold both the [UP] and the [DOWN] button for 2 s again.
To access the corresponding settings page, press the [UP] or the [DOWN] button to increase or
decrease until the desired item is displayed, and then press the [MODE] button to confirm.
◆Battery Power Bar Settings
VOL represents voltage settings. Each bar represents a voltage value. 5 bars voltage values must
be entered one by one. For example, VOL 1 is the first bar voltage value. The default value is 48V.
To set the battery power bar, press the [UP] or the [DOWN] button to increase or decrease the
number. To store a changed setting and access the second bar, press the [MODE] button.
Likewise, after 5 bars of voltage values are entered completely, hold the [MODE] button to
confirm and then return to the previous menu.
To Next Page
Loading...