Shengmilo NOKEE-U - Slowly Start-Up Settings; Power-on Password Settings

To Next Page

To Previous Page

◆Slowly Start-Up Settings

SSP represents a slow start-up. The range is “1-4”, and “4” is the slowest. The default value is “1”.

To slowly start up settings, press the [UP] or the [DOWN] button to select the desired value.

To return to the previous menu, hold the [MODE] button for 2 s.

Interface of Slowly Settings Up

◆Power-on Password Settings

“P3” on the screen means power-on password settings. The default password is 2962.

To access the power-on password settings, press the [UP] or the [DOWN] button to modify the

value and then press the [MODE] button to confirm digits one by one until the correct 4-digit

password is completed, and then press the [MODE] button to access power-on password enable

settings interface, otherwise stay on the password input state.

Power-on Password Entering Interface